{"id":56851,"date":"2022-06-01T17:51:57","date_gmt":"2022-06-01T17:51:57","guid":{"rendered":"https:\/\/www.thepicpedia.com\/faq\/frequent-question-how-to-make-audio-sound-closer\/"},"modified":"2022-06-01T17:51:57","modified_gmt":"2022-06-01T17:51:57","slug":"frequent-question-how-to-make-audio-sound-closer","status":"publish","type":"post","link":"https:\/\/www.thepicpedia.com\/faq\/frequent-question-how-to-make-audio-sound-closer\/","title":{"rendered":"Frequent question: How to make audio sound closer?"},"content":{"rendered":"<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/X8iexmTgtL0\"><\/iframe><\/p>\n<\/p>\n<p>Considering this, how do you make sounds feel closer? To make a vocal sound close in proximity, record closer to the microphone, use compression with a slower attack and fast release, boost the high frequencies, and keep the vocal as dry (less reverb) as possible. By combining these three techniques, you can get a very close-sounding vocal.<\/p>\n<p>Quick Answer, how do you make sound appear more distant? A lower mix, or more dry, sounds closer, higher mix or more wet sounds farther away. If you want to create a better illusion of distance, playing with the pre-delay setting for the reverb can help.<\/p>\n<p>Moreover, how do I make the sound closer in a mix? The simplest and most effective way to create depth in a mix is with volume. In short, louder sounds appear closer, quieter sounds create a sense of distance. As an approximate guide: to double the distance of a sound, decrease its volume by 6dB.<\/p>\n<p>Beside above, how do you fix vocals that sound far away? <\/p>\n<ol>\n<li>Use a high shelf filter to lower some high frequencies (above 5-8khz) (enough so that the vocals sound a little bit less &#8216;present&#8217;) and a high pass filter to take away low frequencies (below 100-200hz).<\/li>\n<li>Put a delay on your vocals to simulate reflections from trees.<\/li>\n<\/ol>\n<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/wC2aEzxgJoc\"><\/iframe><\/p>\n<h2>How do I make the sound closer in audacity?<\/h2>\n<\/p>\n<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/BzBM4yZJuKQ\"><\/iframe><\/p>\n<\/p>\n<h2>How do you make audio sound far away in Pro Tools?<\/h2>\n<\/p>\n<p>Cut high frequencies always help to get the sound more distant. Think about when you are outside a stadium, all you hear is a low rumble, because that the high end is damping by the air and some other materials.<\/p>\n<\/p>\n<h2>Why do distant signals sound darker than close signals?<\/h2>\n<\/p>\n<p>As your distance from the sound source changes, so does the timbre of the sound. By nature, lower sound frequencies carry more energy than higher ones, so as distance increases, higher frequencies are not able to be heard as well because they lose the energy to propagate sound waves much earlier.<\/p>\n<\/p>\n<h2>How do you make dialogue sound like it was recorded outside?<\/h2>\n<\/p>\n<p>If you want to have it sound like it is outside then go record some outside &#8220;ambiance&#8221; and put it under the ADR track. There is absolutely NO reverb outside so if you want to do that in the studio have the talent in a good room that is heavily damped so their is no room sound. You can always add ambiance later.<\/p>\n<\/p>\n<h2>How can I make my music sound deeper?<\/h2>\n<\/p>\n<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/sNCLgUMj0Ks\"><\/iframe><\/p>\n<\/p>\n<h2>What is audio depth?<\/h2>\n<\/p>\n<p>In digital audio, a value called bit depth describes the resolution of the sound data that is captured and stored in an audio file. A higher audio bit depth indicates a more detailed sound recording. Similarly, for image and video files, bit depth is used to determine the resolution of a picture.<\/p>\n<\/p>\n<h2>Why do vocals sound far away?<\/h2>\n<\/p>\n<p>The problem is that you are probably using the wrong type of verb. You need to use a PLATE reverb specifically. There is A LOT of plate reverb on those vocals. You are going to have to play with the settings a bit to get it to sound right.<\/p>\n<\/p>\n<h2>Why do my vocals sound thin?<\/h2>\n<\/p>\n<p>In fact, thin mixes usually come from a poor arrangement. But sometimes they can come from a poor use of EQ, too. When you prevent and address thinness in your track, you can produce a mix that&#8217;s more powerful and impactful. You never want an important chorus to sound thin \u2013 the music will lose it&#8217;s impact.<\/p>\n<\/p>\n<h2>How do I fix my voice too close to my mic?<\/h2>\n<\/p>\n<p>Too Close To The Mic: Multiband Compression A better approach is to use a multiband compressor. Set it to compress the low end, but only when it becomes a problem. This way, you&#8217;ll retain as much of the fullness and body of the vocal as possible. This technique is far from perfect, but it gets the job done.<\/p>\n<\/p>\n<h2>How do you make Spotify sound like it&#8217;s coming from another room?<\/h2>\n<\/p>\n<ol>\n<li>Tap the Settings icon on the bottom right of Spotify&#8217;s home menu.  <\/li>\n<li>Then tap the Equalizer option.  <\/li>\n<li>Go through the list of presets while listening to music and find the one that sounds best to you.<\/li>\n<\/ol>\n<\/p>\n<h2>How can I make my voice sweet and soft naturally?<\/h2>\n<\/p>\n<ol>\n<li>humming.<\/li>\n<li>lip buzzing.<\/li>\n<li>tongue trills.<\/li>\n<li>loosening your jaw by opening your mouth wide, then gently closing it.<\/li>\n<li>yawning.<\/li>\n<li>deep breathing.<\/li>\n<li>gently massaging your throat to loosen tense muscles.<\/li>\n<\/ol>\n<\/p>\n<h2>How does distance affect sound?<\/h2>\n<\/p>\n<p>As distance from the sound source increases, the area covered by the sound waves increases. The same amount of energy is spread over a greater area, so the intensity and loudness of the sound is less. This explains why even loud sounds fade away as you move farther from the source.<\/p>\n<\/p>\n<h2>How do I make audio appear distant in Premiere?<\/h2>\n<\/p>\n<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/rLDOFBJBy_4\"><\/iframe><\/p>\n<\/p>\n<h2>How do you make your voice sound far away in logic?<\/h2>\n<\/p>\n<p><iframe style=\"width:100%;height:420px;\" width=\"auto\" height=\"auto\" src=\"https:\/\/www.youtube.com\/embed\/2lOF2puLi0Q\"><\/iframe><\/p>\n<\/p>\n<h2>Is white noise real?<\/h2>\n<\/p>\n<p>White noise is random noise that has a flat spectral density \u2014 that is, the noise has the same amplitude, or intensity, throughout the audible frequency range (20 to 20,000 hertz). White noise is so named because it&#8217;s analogous to white light, which is a mixture of all visible wavelengths of light.<\/p>\n<\/p>\n<h2>What is blue noise used for?<\/h2>\n<\/p>\n<p>Also known as azure noise, blue noise gets its name from optics, as the color blue is on the higher end of the frequency spectrum for visible light. In audio applications, blue noise is used for dithering, a process where noise is added to a track to smooth out the sound and lessen the audibility of distortions.<\/p>\n<\/p>\n<h2>Is distance important in hearing?<\/h2>\n<\/p>\n<p>Auditory distance perception plays a major role in spatial awareness, enabling location of objects and avoidance of obstacles in the environment. However, it remains under-researched relative to studies of the directional aspect of sound localization.<\/p>\n<\/p>\n<h2>How do you make audio sound like it&#8217;s outside a window?<\/h2>\n<\/p>\n<p>Simply hanging some heavy blankets\/coats over a suitable stand and placing the microphone between the sound source and the blankets will reduce reverberation.<\/p>\n<\/p>\n<h2>How do you make ADR sound more natural?<\/h2>\n<\/p>\n<ol>\n<li>Cut out much of the low end under 400Hz.<\/li>\n<li>Thinned out a lot of the mids.<\/li>\n<li>Put a low pass filter at 10k.<\/li>\n<li>Added very slight reverb, although it seems echoy when the actors yell.<\/li>\n<\/ol>\n<\/p>\n<h2>What does fuller sound mean?<\/h2>\n<\/p>\n<p>reverberant sound Fullness generally implies a long reverberation time, while clarity implies a shorter reverberation time. A fuller sound is generally required of Romantic music or performances by larger groups, while\u2026<\/p>\n<\/p><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Considering this, how do you make sounds feel closer? To make a vocal sound close in proximity, record closer to the microphone, use compression with a slower attack and fast release, boost the high frequencies, and keep the vocal as dry (less reverb) as possible. By combining these three techniques, you can get a very &hellip;<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[27],"tags":[],"_links":{"self":[{"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/posts\/56851"}],"collection":[{"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/comments?post=56851"}],"version-history":[{"count":0,"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/posts\/56851\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/media?parent=56851"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/categories?post=56851"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.thepicpedia.com\/wp-json\/wp\/v2\/tags?post=56851"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}