How do i remove the back of my hp notebook?
On the bottom of the notebook, remove the eight 6 mm P1 Phillips-head screws that secure the bottom cover to the notebook. Carefully separate the edges of the bottom cover from the notebook. Lift the bottom cover off of the notebook and remove.
Contents
How do I take the back off my HP laptop?
Remove the rear corner covers. On the bottom of the notebook, pry up the two rubber feet from the rear corners. Remove the Phillips-head screws that secure each of the corner covers to the base enclosure. Carefully lift the corner covers to disengage the tabs that secure them to the base enclosure and remove.
How do you open the back of a notebook?
- Power down the laptop and disconnect the power cable and any peripheral connections. Video of the Day.
- Close the laptop lid and carefully place the laptop face down on a flat surface.
- Locate holding screws around the perimeter of the back of the laptop.
- Lift off the back of the laptop.
How do I open the back of my HP probook?
- On the bottom of the notebook, remove the eight 6 mm P1 Phillips-head screws that secure the bottom cover to the notebook.
- Carefully separate the edges of the bottom cover from the notebook.
- Lift the bottom cover off of the notebook and remove.
How can I open my laptop back without a screwdriver?
- Flathead screwdriver.
- Coin.
- Butter knife.
- Hacksaw.
- Toothbrush.
- Old CD.
- Pliers.
- Thumbnail.
How do I take apart my HP 15 laptop?
How do you take the back off a HP Pavilion 15 laptop?
- Step 1 Battery and Back Cover.
- Remove the two 8mm screws underneath with a Phillips #1 screwdriver.
- Remove the two plastic tabs with a metal spudger.
- Remove the sixteen 8mm screws that hold the bottom cover with a Phillips #1 screwdriver.
- Pull the Optical Drive out.
How do you take off a laptop case?
What can I use if I don’t have a Phillips screwdriver?
If you’re dealing with a single-slot screw, head to your kitchen or wallet for an alternative to a screwdriver. The first thing you could try is a kitchen knife. Choose one that has a rounded tip like a butter knife or a small knife that you would use for a cheese board.
How do you remove a stubborn laptop screw?
Cut a rubber band with scissors and lay it flat on the screw head. Press the screwdriver into the screw and use pressure while turning to get a grip and twist the screw. The screwdriver compresses the rubber band and improves the grip on the screw.
How do you open up a laptop?
- Power down your laptop, remove its power cable and then flip the whole unit over so that the bottom is facing upward.
- Take a standard Phillips screwdriver and remove all of the screws that were underneath the rubber stoppers.
How do you open a HP 14 laptop?
How do I open my HP f305dx 15?
- Step 1 Battery.
- Turn the computer upside down on a flat surface.
- Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.
- Lift the battery from the middle and then pivot it outward to remove it from the computer.
- Step 5 Keyboard.
- Parts for your other stuff.
How do I open my HP Pavilion desktop case?
Loosen the side panel thumbscrew on the back of the computer. Grasp the handle and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it.
How can I open my computer?
- Turn the Computer Off. © Edward Shaw/E+/Getty Images.
- Unplug the Power Cable. Unplug the Power Cable.
- Remove All External Cables and Attachments. Remove All External Cables and Attachments.
- Remove the Side Panel Retaining Screws. Remove the Side Panel Retaining Screws.
- Remove the Case Side Panel. Remove the Case Side Panel.
What does a Phillips head screwdriver look like?
Phillips. A Phillips screwdriver has a head with pointed edges in the shape of a cross, which fits neatly into the cross slots of a Phillips screw. Phillips screwdrivers are available in five different sizes, from zero to four.