How do i open my realtree hp notebook?

How do I open the back of my HP laptop?

1. Turn your laptop off.
2. Put the laptop on its side and the bottom of the computer faces outward.
3. Slide the release switch to the right to release the battery.
4. Take out the two screws from the cover to access the hard drive.
5. Remove all the screws from the back of the door.

How do I take the bottom off my HP laptop?

1. On the bottom of the notebook, remove the eight 6 mm P1 Phillips-head screws that secure the bottom cover to the notebook.
2. Carefully separate the edges of the bottom cover from the notebook.
3. Lift the bottom cover off of the notebook and remove.

What do you do if your HP laptop wont turn on?

1. Check the power supply and battery. If your HP laptop won’t turn on even when plugged in, start by checking the power supply.
2. Diagnose screen issues.
3. Remove all devices from your laptop.
4. Use a rescue disc.
5. Boot in safe mode.
6. Check hardware.
7. Diagnose, repair, or replace.

How do you open up a laptop?

1. Power down your laptop, remove its power cable and then flip the whole unit over so that the bottom is facing upward.
2. Take a standard Phillips screwdriver and remove all of the screws that were underneath the rubber stoppers.

How do I take the back off my laptop?

1. Power down the laptop and disconnect the power cable and any peripheral connections. Video of the Day.
2. Close the laptop lid and carefully place the laptop face down on a flat surface.
3. Locate holding screws around the perimeter of the back of the laptop.
4. Lift off the back of the laptop.

How do you open a HP 14 laptop?

How do I take apart my HP 15 laptop?

Why my laptop is not opening?

If your laptop won’t power up, a faulty power supply, failed hardware, or a malfunctioning screen could be to blame [1]. In many cases, you may be able to resolve the problem yourself by ordering replacement parts or adjusting your laptop’s configuration.

Why my computer is not opening?

If your computer won’t boot up, the first thing to do is make sure your PC is plugged in and the power switch is turned on. If it is and it still won’t start, try plugging your computer into a different outlet. If you’re using a power strip or surge protector, plug it directly into the wall instead.

What should you do if your laptop won’t turn on?

1. Check and replace the power supply.
2. Make sure it’s not a screen issue.
3. Remove any bootable media drives.
4. Detach from any docking stations.
5. Listen for any beeping sounds.
6. Try doing a hard restart.
7. Make sure all cooling vents are clear.
8. Replace the CMOS battery.

How can I open my laptop back without a screwdriver?

1. Flathead screwdriver.
2. Coin.
3. Butter knife.
4. Hacksaw.
5. Toothbrush.
6. Old CD.
7. Pliers.
8. Thumbnail.

How can I open my computer?

1. Turn the Computer Off. © Edward Shaw/E+/Getty Images.
2. Unplug the Power Cable. Unplug the Power Cable.
3. Remove All External Cables and Attachments. Remove All External Cables and Attachments.
4. Remove the Side Panel Retaining Screws. Remove the Side Panel Retaining Screws.
5. Remove the Case Side Panel. Remove the Case Side Panel.

How do I take the back off my HP Chromebook?

How do I remove the battery from my HP stream 14?

Why won’t my laptop turn on even when plugged in?

If your laptop won’t power on, even when it’s plugged in could have a faulty power supply, battery, motherboard, video card or RAM. When troubleshooting a laptop that won’t start, begin with the basics. Ensure the plug to the power cord is plugged into an outlet and to the computer.