How can i factory reset my hp vista notebook using external monitor ?

Turn on the computer and immediately press the F11 key repeatedly, about once every second, until Recovery Manager opens. Next. An Advanced options screen opens. Select Recover your computer to its original factory condition, and then click Next.

Subsequently, how do I restore my HP Windows Vista to factory settings without CD?

1. Turn on the computer.
2. Press and hold the F8 key.
3. At the Advanced Boot Options screen, choose Safe Mode with Command Prompt.
4. Press Enter.
5. Log in as Administrator.
6. When Command Prompt appears, type this command: rstrui.exe.
7. Press Enter.

Furthermore, how do I wipe my HP Vista computer? Press the Power button to start the PC, and then press the f11 key when the standard BIOS prompts are displayed on the black screen. NOTE: Pressing the f11 key during the startup on a computer with an HP factory image will start the system recovery process even if the prompt is not displayed.

Likewise, how do I force my HP computer to factory reset?

1. Start your computer and press the F11 key repeatedly.
2. On the Choose an option screen, click Troubleshoot.
3. Click Reset your PC.
4. On the Reset your PC screen, click Next.
5. Read and respond to any screens that open.
6. Wait while Windows resets your computer.

Amazingly, how do I restore my Windows Vista laptop to factory settings?

1. Reboot the PC.
2. Hit F8 on the loading screen to pull up the “Advanced Boot Options” menu.
3. Select “Repair Your Computer” and hit Enter.
4. If required, enter the administrator password and language setting.
5. Select “Dell Factory Image Restore” and hit Next.

Restart your PC and press F8 repeatedly before Windows loads to open Vista‘s Advanced Boot Options screen. Use the arrow keys to select Safe Mode and press Enter. On the low-res Windows Welcome screen, choose the Administrator account, which by default has no password.

How do you wipe a computer without the administrator password?

1. Turn your PC and wait for the login screen to appear.
2. In the bottom right corner, click on the Power options.
3. Press and hold the Shift key on your keyboard and click the Restart button.
4. Your PC will now restart and enter the Windows Recovery Environment.

How do I master Reset my HP laptop?

Turn off the computer, and then unplug the power cord. Disconnect any peripheral devices, and then remove the computer from any port replicator or docking station. With the power cord unplugged, press and hold the Power button for approximately 15 seconds. After you drain the capacitors, plug in the power cord.

How do I completely wipe my HP laptop?

Turn on the laptop and immediately press the F11 key repeatedly until System Recovery starts. On the Choose an option screen, click “Troubleshoot.” Click “Reset this PC.” Click either “Keep my files” or “Remove everything” depending on which you prefer.

Where is the F11 key on HP laptop?

1) Press the power button and then immediately begin tapping the Esc key. The startup menu will appear. F11 is listed in the menu.

How do I log into Windows Vista without a password?

1. Use Your Windows Vista Password Reset Disk.
2. Take Educated Guesses.
3. Have an Administrator Change It.
4. Use This Hack to Reset Your Vista Password.
5. Hack Into the PC With a Password Recovery Program.
6. Still Can’t Find Your Windows Vista Password?

How do I bypass Windows Vista password without software?

How do I log into Windows Vista if I forgot my password?

Method 1: Use Windows Vista Password Reset Disk Once you’ve typed the wrong password, Windows Vista will show a Reset password link below the login box. Click on Reset password. Make sure that password reset disk is plugged into the computer at this point. When the Password Reset Wizard appears, click Next to continue.

How do I bypass administrator password on HP laptop?

1. Log on to Windows by using an Administrator account that has a password that you remember.
2. Click Start.
3. Click Run.
4. In the Open box, type “control userpasswords2″.
5. Click Ok.
6. Click the user account that you forgot the password for.
7. Click Reset Password.

How do I factory reset my HP laptop without f11?

Hi: The only way to factory reset the notebook if the F11 prompt doesn’t work would be to order W8 recovery media for your specific model PC from HP. Now, if you want to clean install W8. 1, you can do that using the W8 product key in your notebook’s BIOS.

How do I hard Reset my laptop?

Generally, a hard reboot is done manually by pressing the power button until it shuts down and pressing it again to reboot. Another unconventional method is by unplugging the computer from the power socket, plugging it back in again and pressing the power button on the computer to reboot it.

How do I restore my HP laptop to factory settings without a disk?

1. Click on the Start menu and choose the “Settings” option. This looks like a cog wheel, and it is where you will access all of the major settings on your laptop.
2. In the search bar, type “reset.”
3. From there, choose the “Reset this PC” option once the results have popped up.

What does Ctrl F12 do?

Ctrl+F12 opens a document in the Word. Shift+F12 saves the Microsoft Word document (like Ctrl+S). Ctrl+Shift+F12 prints a document in the Microsoft Word.

What is F10 key?

The F10 key is a function key found at the top of almost all computer keyboards. The key is most often used to activate the menu bar or Ribbon of an open Windows application. F10 also has other uses depending on the computer and program, as mentioned below.

What does Ctrl F10 do?

Ctrl+F10: Maximize document window. Alt+Shift+F10: Display a menu or window for an available selection.

How do I login as Administrator on Vista?

Accessing Administrator: Method 1 Don’t press Enter; instead, press the F8 key, and you’ll progress to the Safe Mode boot screen. Choose the first option, “Safe Mode” and press Enter. After a time, Vista will show you the log-in screen with two options, Administrator and Other User. Click the Administrator icon.

What is HP default administrator password?

The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers. See Set (encrypt) the administrator/root password for details.

How do I restore my laptop to factory settings without password?

1. If you are locked out of your laptop and cannot access system, click the Power button on login screen while keep pressing shift button. Then select Troubleshoot > Reset this PC. If you can access your PC, click on the Start button > Settings > Update & Security and Reset this PC.

How do I factory reset my computer with the power button?

1. Press and hold the power button on the front of the computer for approximately 5 seconds. The computer will shut off. No lights should be near the power button. If lights are still on, you can unplug the power cord to the computer tower.
2. Wait 30 seconds.
3. Push the power button to turn the computer on again.

How do you wipe a computer?

To start a factory reset, click on the Launcher. Open Settings and scroll down to the Advanced section. From there, find the Reset Settings, and under Powerwash, click Reset. This will prompt a restart, which will flush away all your personal information.

How do I factory reset my HP g60 laptop?

What function key restores factory settings?

Rather than reformatting your drives and restoring all your programs individually, you can reset the entire computer back to its factory settings with the F11 key. This is a universal Windows restore key and the procedure works on all PC systems.

What does the F11 key do?

The F11 key allows you to activate full-screen mode in your browser. By pressing it again, you will return to the standard view with the menu bar. In Microsoft Excel, you can use the Shift key with F11 to quickly create a new spreadsheet in a new tab.

What does Alt GR F11 do?

Ctrl + Alt + F11 sort of puts the GUI to sleep, and puts you into a virtual terminal mode, something like the old fashion ttys. Once in this mode you can choose between 6 different tty input screens. Each acting like it is an old-fashion tty.

How do I disable f10 on my HP laptop?

Press the f10 key to open the BIOS setup window. Press the right-arrow or left-arrow keys to navigate to the System Configuration option. Press the up-arrow or down-arrow keys to navigate to the Action Keys Mode option, and then press the enter key to display the Enable / Disable menu.

What is Alt F4?

Alt F4 FAQ Pressing the Alt and F4 keys together is a keyboard shortcut to close the currently active window. For example, if you press this keyboard shortcut while playing a game, the game window will close immediately.